UHPPOTE DIY Full Complete Security Wiegand 26 Access Control Kit Including Strike Lock 3A Power Supplu ID RFID Card Reader Review

Access Board:
Communication: TCP/IP
Software Supportable Database: Access & SQL
Power Supply Input: DC 12V, 4~7A
Input Format of Reader: Wiegand 26 bit (All card reader with compatible protocol, such as Motorola, HID, EM, M1, etc)
Quantity of Readers: 2 units
Door Controlled: Control 1 door, get in and out door by swiping card, or get in by swiping card and get out door by button
Door Opening Time Extending: Setting: 1~600 seconds (adjustable)
Max Quantity of Controller: Unlimited (Remark: N denotes q ‘ ty of computer serial port or q’ty of 485hub port, support 256pcs ports)
Quantity of Users: 20,000 users
Quantity of Event Buffers (offline): 100,000 event buffers
Max Distance from Reader to Controller: 100m/328ft (suggestion distance 80m/262ft)
Alarm for Long Time Door Open, Unlawful Entry, Intimidate
Fire and alarm linkage: If no connection with the expansion board, only has software interface alarm, and drive the computer speaker. If connected with expansion board, is able to alarm by hardware, if connected with strengthened expansion board, then is able to Security alarm

Electric Lock:
Voltage: DC12V
Holding Force: 500kg / 1102lb
Mode: Fail secure (Locked when power is removed)
Signal Output: Not
Dimension: 150Lx39.5Wx34H(mm) / 5.91Lx1.56Wx1.33H(inch)

RFID Reader:
Frequency: 125Khz
Card Type: Stand EM ID Card (Can’t support some encrypted cards,such as HID, Cobra, APCiK etc)
Reading range: 2-10mm / 0.08-0.39in
Dimension: 115mmx74mmx16mm / 4.5″x2.9″x0.6″
Communication distance: Less than 100m/328ft

Keyfob:
Operation Frequency: 125KHz
Reading distance: 3-10cm / 1.18-3.94in
Each keyfob has an unique ID number

Package:
1 x RFID reader
1 x Electric strike lock
1 x Power supply
1 x Exit button
1 x Access board
5 x RFID Keyfobs