- Make sure this fits by entering your model number.
- World first two relay Z-wave 400 series module with power meter function in a very slim case./ Adopt Z-Wave protocol to secure the success of wireless two way communication.
- Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps)./ Higher RF output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range.
- Slim design, easy install. Resistive load 1500W X 2. Instant power Wattage and Accumulated power consumption KWh report. Overload protection. Z-Wave V6.02
- Very low electricity consumption, meet Europe year 2012 energy-related products requirement directive 2009/125/EC no. 1275/2008. Z-Wave Certificated No. ZC08-13040018
- LVD:EN 60669-2-1:2004+A1:2009+A12:2010, EN 60669-2-2 :2006 EN 60669-1:1999+A1:2002+A2:2008+IS1:2009 R&TTE: EN 301489, EN 300200,
In Wall Dual Relay(1 Way) Switch Module 2X1.5KW (Each relay with power meter function) Z-Wave series This in-wall switch module is a transceiver which is a Z-WaveTM enabled device and is fully compatible with any Z-WaveTM enabled network. Mini size design let the module can easily hide itself into the wall box and that will be good for the house decoration. There are many kind of application by using the module to switch AC power ON and OFF, one main application is the light control. The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of light like incandescent, fluorescent and LED light. This in-wall switch module is able to detect Instant power wattage (5~1500W) and overload wattage (1600~1700W) of connected light or appliances. When detecting overload state, the Module will be disabled and its ON/OFF button will be lockout of which LED will flash quickly for 30 seconds. However, unplug and re-connect the Module will reset its overload condition to normal status. This in-wall switch module can active sent out instant power wattage when variation over 5% or active sent out state change by using S1,S2 input , this allows the controller to avoid polling the reading wattage value and state of the switch and can increase the efficiency of controller. FCC ID : RHHPAN04 We also have CE Certificated for PAN 04 PAN04 is US frequency (908.42 MHz). The dimensions of the unit are 47.5 x 39.0 x 15.6 mm. Q:Can this single module control two non-dimming wall switches in the same wall box? A:Yes, this single module can control two non-dimming wall switches in the same wall box. Q: Can it control the loads independently? A: Yes, it can control the loads independently. Q:Does this mean the switch is normally open? A: NO, it does not mean the switch is normally open of off. You can control to turn on or off. https://www.youtube.com/watch?v=fr03HLWEm1Y&feature=youtu.be